LINK® INTRODUCES
SECOND THREE-POSITION RATCHETING
UNIDRIVER
LINK Tools, the global
leader in hand tool innovation, is introducing a 3/8 inch
drive three-position UniDriver®, joining its earlier introduction of a solid-core 1/ 4 inch drive tool that connects at both ends. The new Ratcheting UniDriver is expected to have very broad appeal to many industries and leisure time hobbyists.
“We fully expect the
LINK Ratcheting UniDriver to become the most
universal hand tool sold,” said John Davidson, CEO of Link
Tools. Davidson added, “A LINK Tools
UniDriver combines all the functions of a speeder, an
extension bar, a screwdriver and a ratchet in one tool.”
The new, all-metal Ratcheting
UniDriver is a key addition to any toolbox because of its
solid metal core and its ability to ratchet in a clockwise or
counter clockwise direction or to be set to neutral. The
Ratcheting UniDriver can loosen or tighten attachments
rapidly, and because of LINK’s patented
‘hand-to-work’ promise, there’s no danger of dropped sockets
damaging a machine or delaying its repair.
When set in neutral, the
LINK Ratcheting UniDriver can be used with a
t-bar or ratchet wrench “plugged” into the top for greater
torque. Free rotation of the solid shaft with the handle
remaining in neutral means the Ratcheting UniDriver can be
guided by the handle without any loss of torque while in use.
This unique versatility in a single tool results in
significantly greater efficiency, safety and economy.
In addition, when the ratchet
wrench and the ratcheting UniDriver are alternated, forward
and back, this achieves twice as much turning, doubling the
output of LINK tools over conventional tools. Because of is
solid core, the Ratcheting UniDriver has just as much strength
as any 6” extension bar.
TÜV, Europe’s premier
licensing organization said about its study of
LINK Tools in the workplace:
LINK Tools “clearly show a significant
improvement in task performance of the drive tool system
compared to conventional systems.” LINK Tools
have found wide acceptance in the aviation, automotive and
nuclear industries, as well as by other professionals and even
do-it-yourself tool users.
The 3/8” drive and the 1/4”
drive for Ratcheting UniDrivers retail for $54.99 and $44.99
respectively. Each can be used with any high quality, branded
socket. The Ratcheting UniDriver can be obtained with any of
the LINK sets for a slight charge.
LINK also offers a wide range of additional
accessories which lock to each other and with all quality
sockets.
Based in Chicago, Illinois, LINK Tools International
(U.S.A.), Inc. is the global leader in high efficiency
mechanics’ hand tools.
LINK®
and QUICK-LOCK® are
registered trademarks of LINK Tools
International (U.S.A.), Inc. For additional information
go to www.link-tools.com or
call 1-888-727-LINK
